|
prev. 7/11 next.
PRODUCTS:
BATTERY CHARGERS
|
 EKRI
|
microprocessor; resonant technology; high frequency (70kHz); mono-phase
or three-phase; 7-bar LED displaying battery voltage, instantaneous
current, charge level and phase of selected charging curve; models:
20A at 12-48V, 40A at 12-24V, 50A at 24-80V, 70A at 24-48V, 100A
at 24-80V and 140A at 24-48V.
|
| |
|
CB-250HF |
resonant technology; high frequency (66kHz); status LED; for lead-acid
or nickel-cadmium batteries; models: 14A at 12V, 10A at 24V, 16A
at 24V and 8A at 48V.
|
| |
|
CB-500RI |
resonant technology; high frequency (50kHz); status LED; models:
12.5A at 48V, 25A at 12, 24 and 48V, 50A at 12 and 24V.
|
| |
|
CB-100HF |
high frequency (66kHz); for lead-acid or nickel-cadmium
batteries; models: 4A at 24V and 7A at 12V. |
| |
|
CB-40HF |
high frequency; for 24V lead-acid batteries; power 40W. |
| |
|
CB24-15MS
|
microprocessor; low frequency; 2 programmable charge curves; status
LED; galvanically isolated; output voltage: 24V; ouput current 15A.
|
| |
|
CB-1000HF
|
High frequency battery charger featuring microprocessor control, status LEDs (output
for remote LEDs); 5 charge algorithms; light and compact; suitable for on-board use;
Power 1000-1200W.
Models: 40A [24V], 22A [48V], 15A [72V], 13A [80V], 12A [96V], 9A [120V]
|
| |
|
CB-350HF
|
High frequency battery charger featuring microprocessor control, status LEDs (output
for remote LEDs); 5 charge algorithms; light and compact; suitable for on-board use;
Power 350-350W.
Models: 12A [12V], 12A [24V], 6A [24V] fanless.
|
Technical data subject to changes without
notice. For further information contact Elektrosistem.
|
